NSN 5306-01-398-4024
Wheel Bolt
Between 0.722 inches and 0.742 inches fastener length, hexagon head style, between 0.178 inches and 0.198 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number 5905228-4 for national stock number 5306013984024.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-398-4024.
-
MPN or Model
5905228-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.457 inches -
Fastener Length
Between 0.722 inches and 0.742 inches -
Head Style
Hexagon -
Head Height
Between 0.178 inches and 0.198 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Hole Diameter
Between 0.044 inches and 0.050 inches -
Thread Diameter
0.1900 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Hole Configuration Style
Hexagon longitudinal hole -
Material
Iron alloy 660 -
Material Specification
Ams 5731, a286 assn standard single material response or ams 5737, a286 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-211-8165 MPN BACS12BE02-4Machine Screw
- 5305-00-233-6065 MPN 106385PT3-15Close Tolerance Screw
- 5305-00-242-4637 MPN 54267-4-20Shoulder Screw
- 5305-00-427-6738 MPN NAS1189-04P10Socket Head Cap Screw
- 5305-00-541-9319 MPN 106706T8-20Close Tolerance Screw
- 5305-00-717-2919 MPN 16991-98C-8Socket Head Cap Screw
- 5305-00-934-0193 MPN B2A356-4C3Socket Head Cap Screw
- 5305-01-014-8455 MPN NAS1101E06-6Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-398-4024 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
5905228-4 | Hamilton Sundstrand Corporation |
1124965-4 | Sps Technologies, Llc |