NSN 5306-01-417-3816
Coaxial Connector
Between 2.798 inches and 2.828 inches fastener length, pan head style, between 0.820 inches and 0.830 inches head diameter, head height: 0.083 inches .
Manufacturer part number EWB22-7-32 for national stock number 5306014173816.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-417-3816.
-
MPN or Model
EWB22-7-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.813 inches -
Fastener Length
Between 2.798 inches and 2.828 inches -
Head Style
Pan -
Head Diameter
Between 0.820 inches and 0.830 inches -
Head Height
0.083 inches -
Hole Diameter
0.055 inches -
Grip Diameter
Between 0.436 inches and 0.438 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Hole Quantity
2 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c fastener and 50.0 rockwell c fastener -
Hole Configuration Style
Spline -
Material
Steel comp h11 -
Material Specification
Ams 4985 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-450-5978 MPN NAS1101E4H14Machine Screw
- 5305-00-557-8246 MPN NAS1207-48Close Tolerance Screw
- 5305-00-939-0867 MPN NAS1131-6Close Tolerance Screw
- 5305-01-025-6964 MPN HT4017-08-7Close Tolerance Screw
- 5305-01-043-5752 MPN 106750-6-19Close Tolerance Screw
- 5305-01-054-2535 MPN BACB30LK06-4Close Tolerance Screw
- 5305-01-063-3777 MPN NAS1190-08P26BSocket Head Cap Screw
- 5305-01-077-3100 MPN HT4016-4-13Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-417-3816 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWB22-7-32 | Sps Technologies, Llc |