NSN 5306-01-449-7950
Coaxial Connector
Between 4.370 inches and 4.400 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS6203-65D for national stock number 5306014497950.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-449-7950.
-
MPN or Model
NAS6203-65D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 4.370 inches and 4.400 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Thread Diameter
0.190 inches -
Grip Length
Between 4.052 inches and 4.072 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.956 inches first hole and 0.986 inches first hole -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 11, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6203 professional/industrial association standard
More from these suppliers
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-008-5846 MPN NAS1632C26Machine Screw
- 5305-00-057-0522 MPN MS51958-26Machine Screw
- 5305-00-059-3672 MPN NAS1635&4&5Machine Screw
- 5305-00-067-9900 MPN NASM51861-60Tapping Screw
- 5305-00-100-6602 MPN NAS1124-11Close Tolerance Screw
- 5305-00-140-8001 MPN MS51861-12Tapping Screw
- 5305-00-150-3178 MPN NAS1352-4-8Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-449-7950 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6203-65D | National Aerospace Standards |
Stock Check
- NE: 364
- NS: 10