NSN 5306-01-455-5692
Coaxial Connector
2.942 inches fastener length, spline extended washer head style, 0.700 inches head height, extended washer diameter: between 1.615 inches and 1.625 inches .
Manufacturer part number VCG0038-14-26 for national stock number 5306014555692.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-455-5692.
-
MPN or Model
VCG0038-14-26
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.317 inches -
Fastener Length
2.942 inches -
Head Style
Spline extended washer -
Head Height
0.700 inches -
Extended Washer Diameter
Between 1.615 inches and 1.625 inches -
Extended Washer Thickness
Between 0.116 inches and 0.136 inches -
Grip Diameter
Between 0.8730 inches and 0.8740 inches -
Head Minor Diameter
Between 0.923 inches and 0.938 inches -
End Application
C-17 globemaster iii -
Thread Diameter
0.8750 inches -
Grip Length
1.625 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Nickel alloy 718 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-575-2570 MPN 3M943E4-5-6Headle Shoulder Pin
- 5305-01-435-7935 MPN BACB30LU9-34Close Tolerance Screw
- 5305-01-512-8356 MPN 3M1170C3-8AFClose Tolerance Screw
- 5306-01-044-0737 MPN VAL22034-7FS18Shear Bolt
- 5306-01-044-7447 MPN VAL23607-5-8Shoulder Bolt
- 5306-01-054-3421 MPN C7521L6-18Shear Bolt
- 5306-01-235-1679 MPN ST3M607-6H17Shoulder Bolt
- 5306-01-269-8699 MPN 3M1043-5-21-87Internally Relieved Body Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-455-5692 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0038-14-26 | Valley-todeco, Inc. |
AIC872-14-26 | Sps Technologies, Llc |
SLB264-14-26 | Space-lok, Inc. |
PBF1593-14-26 | Sps Technologies, Llc |
84268-14-26 | Sps Technologies, Llc |
3447-14-26 | Arconic Global Fasteners & Rings, |
3D0028-14-26 | Boeing Company, The |
872-14-26 | Sps Technologies, Llc |