NSN 5306-01-456-4442
Coaxial Connector
Between 2.303 inches and 2.333 inches fastener length, spline extended washer head style, between 0.040 inches and 0.060 inches head height, extended washer diameter: between 0.922 inches and 0.932 inches .
Manufacturer part number 3D0028-8-24 for national stock number 5306014564442.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-456-4442.
-
MPN or Model
3D0028-8-24
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.818 inches -
Fastener Length
Between 2.303 inches and 2.333 inches -
Head Style
Spline extended washer -
Head Height
Between 0.040 inches and 0.060 inches -
Extended Washer Diameter
Between 0.922 inches and 0.932 inches -
Extended Washer Thickness
Between 0.062 inches and 0.082 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Head Minor Diameter
Between 0.547 inches and 0.562 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-502-0481 MPN 3M1170C3-16AClose Tolerance Screw
- 5305-01-539-5816 MPN 3M927-4L8Close Tolerance Screw
- 5305-01-629-9065 MPN BACB30LU4-30Close Tolerance Screw
- 5306-00-205-3700 MPN ACB30NE6H18Close Tolerance Bolt
- 5306-01-005-0472 MPN VAL23029-4-14Close Tolerance Bolt
- 5306-01-045-9505 MPN ST3M507-3-22Shoulder Bolt
- 5306-01-056-5442 MPN BACB30LM4-15Shear Bolt
- 5306-01-059-3587 MPN BACB30NE5-42Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-456-4442 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3D0028-8-24 | Boeing Company, The |
AIC872-8-24 | Sps Technologies, Llc |
VCG0038-8-24 | Valley-todeco, Inc. |
PBF1593-8-24 | Sps Technologies, Llc |
84268-8-24 | Sps Technologies, Llc |
3447-8-24 | Alcoa Global Fasteners, Inc. |