NSN 5306-01-462-2890
Close Tolerance Hex Head Bolt
Between 2.443 inches and 2.463 inches fastener length, spline drive shear head head style, 0.257 inches head height, grip diameter: between 0.671 inches and 0.703 inches .
Manufacturer part number ST3M744-7D32 for national stock number 5306014622890.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-462-2890.
-
MPN or Model
ST3M744-7D32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.453 inches -
Fastener Length
Between 2.443 inches and 2.463 inches -
Head Style
Spline drive shear head -
Head Height
0.257 inches -
Grip Diameter
Between 0.671 inches and 0.703 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Head Minor Diameter
Between 0.711 inches and 0.717 inches -
End Application
F18 e/f -
Thread Diameter
0.4375 inches -
Grip Length
2.000 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.328 inches first hole and 2.338 inches first hole -
Part Name Assigned By Controlling Agency
Bolt-close tolerance, spline drive, cre (125 ksi fsu) drilled, short thread -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-056-1513 MPN BACB30LU4-35Close Tolerance Screw
- 5305-01-106-3860 MPN 3M926-5L10Close Tolerance Screw
- 5305-01-170-4571 MPN BACB30LK2-4Close Tolerance Screw
- 5305-01-364-8276 MPN BACS12FA3K5Machine Screw
- 5305-01-365-0400 MPN BACB30LH4SU10Close Tolerance Screw
- 5306-00-494-5732 MPN VAL23602-4DS024Close Tolerance Bolt
- 5306-00-503-5701 MPN VAL23602-7D016Close Tolerance Bolt
- 5306-01-043-1871 MPN VEP220121-5VH22Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-462-2890 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M744-7D32 | Boeing Company, The |
VCG0001-7D32 | Valley-todeco, Inc. |
AIC687-7D32 | Sps Technologies, Llc |
PBF1265-7D32 | Sps Technologies, Llc |
122895-7D32 | Sps Technologies, Llc |
VS3174-7D32 | Alcoa Global Fasteners, Inc. |
11823-7D32 | Reid Products Inc. |
S406-7D32 | Huck Intl Inc |
MB154-7D32 | Hi-shear Corporation |
GS1015-7D32 | B & B Specialties Inc. |
ST3M744-7D32 | Reid Products Inc. |