NSN 5306-01-465-4111
Coaxial Connector
Between 4.649 inches and 4.679 inches fastener length, spline extended washer head style, 0.800 inches head height, extended washer diameter: between 1.846 inches and 1.858 inches .
Manufacturer part number VCG0037-16-52 for national stock number 5306014654111.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-465-4111.
-
MPN or Model
VCG0037-16-52
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.573 inches -
Fastener Length
Between 4.649 inches and 4.679 inches -
Head Style
Spline extended washer -
Head Height
0.800 inches -
Extended Washer Diameter
Between 1.846 inches and 1.858 inches -
Extended Washer Thickness
Between 0.134 inches and 0.154 inches -
Grip Diameter
Between 0.9960 inches and 0.9990 inches -
Head Minor Diameter
Between 1.047 inches and 1.062 inches -
Thread Diameter
1.000 inches -
Grip Length
Between 3.240 inches and 3.260 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Minimum Yield Strength
125000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-526-4145 MPN BACB30LU3D15Close Tolerance Screw
- 5306-00-403-0175 MPN MS21250-10038Shear Bolt
- 5306-00-526-3994 MPN J644P13BMachine Bolt
- 5306-01-005-6105 MPN J644P16AMachine Bolt
- 5306-01-025-6435 MPN VAL23029-4-13Close Tolerance Bolt
- 5306-01-027-5249 MPN ST3M571-4-18Close Tolerance Bolt
- 5306-01-033-2662 MPN BACB30NE6H7Close Tolerance Bolt
- 5306-01-332-3214 MPN VAL23611-8D037Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-465-4111 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0037-16-52 | Valley-todeco, Inc. |
AIC874-16-52 | Sps Technologies, Llc |
PBF1594-16-52 | Sps Technologies, Llc |
84604-16-52 | Sps Technologies, Llc |
3D0073-16-52 | Boeing Company, The |