NSN 5306-01-471-9145
Coaxial Connector
3.550 inches fastener length, dished hexagon head style, 0.125 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6704DU50 for national stock number 5306014719145.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-471-9145.
-
MPN or Model
NAS6704DU50
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
3.550 inches -
Head Style
Dished hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.2500 inches -
Grip Length
3.125 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.372 inches first hole -
Material
Plastic polyamide locking feature -
Surface Treatment
Passivate fastener -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-080-8127 MPN NAS1599Electrical Receptacle Connector
- 5940-01-430-2097 MPN NAS1063B18-37Terminal Board Marker Strip
- 5305-00-009-5709 MPN NAS1100E06-10PMachine Screw
- 5305-00-051-2330 MPN NASM51958Machine Screw
- 5305-00-058-9366 MPN MS51977-23Setscrew
- 5305-00-144-0416 MPN MS35307-399Hexagon Head Cap Screw
- 5305-00-264-2195 MPN NAS223-22Machine Screw
- 5305-00-425-2174 MPN NAS1352C8LN52Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-471-9145 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6704DU50 | National Aerospace Standards |