NSN 5306-01-474-0478
Coaxial Connector
Between 1.110 inches and 1.141 inches fastener length, spline drive shear head head style, 0.187 inches head height, width between flats: 0.605 inches .
Manufacturer part number C7521-5-11 for national stock number 5306014740478.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-474-0478.
-
MPN or Model
C7521-5-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.110 inches and 1.141 inches -
Head Style
Spline drive shear head -
Head Height
0.187 inches -
Width Between Flats
0.605 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Head Minor Diameter
0.605 inches -
End Application
F16-2034 -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
111000 pounds per square inch -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-056-5452 MPN BACB30LU5-4Close Tolerance Screw
- 5305-01-169-0017 MPN LD111-0044-2410Close Tolerance Screw
- 5305-01-203-6447 MPN 3M927-4L6Close Tolerance Screw
- 5305-01-349-4192 MPN VCL0009-5-23Close Tolerance Screw
- 5306-00-253-1665 MPN VAL23033-6-15Shear Bolt
- 5306-00-286-0198 MPN VAL23033-5-11Shear Bolt
- 5306-00-310-8630 MPN J643P07AMachine Bolt
- 5306-00-349-2428 MPN STSBG002A06U035Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-474-0478 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C7521-5-11 | Lockheed Martin Corporation |
AIC596-5-11 | Sps Technologies, Llc |
VCG0009-5-11 | Valley-todeco, Inc. |
H411-5-11 | Huck International, Inc. |
120978-5-11 | Sps Technologies, Llc |
120978-5-11 | Sps Technologies, Llc |
VS3133-5-11 | Alcoa Global Fasteners, Inc. |
C7521 | Lockheed Martin Corporation |