NSN 5306-01-475-5199
Coaxial Connector
0.657 inches fastener length, dished hexagon head style, 0.156 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS6605L3 for national stock number 5306014755199.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-475-5199.
-
MPN or Model
NAS6605L3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
0.657 inches -
Head Style
Dished hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
End Application
Fixed wing aircraft, c130j hercules, lockheed martin corp -
Thread Diameter
0.3125 inches -
Grip Length
0.188 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp 4340 and steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5305-00-014-4723 MPN MS51861-14Tapping Screw
- 5305-00-057-0537 MPN MS51958-53Machine Screw
- 5305-00-059-8229 MPN MS35214-4Machine Screw
- 5305-00-151-1550 MPN NAS205-48Machine Screw
- 5305-00-151-5688 MPN MS27039C0819Machine Screw
- 5305-00-194-5640 MPN NAS498 REV 13Machine Screw
- 5305-00-308-1838 MPN NAS1218E06-7Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-475-5199 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6605L3 | National Aerospace Standards |