NSN 5306-01-488-2316
Coaxial Connector
1.590 inches fastener length, dished hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.678 inches and 0.690 inches .
Manufacturer part number NAS6407U17 for national stock number 5306014882316.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-488-2316.
-
MPN or Model
NAS6407U17
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
1.590 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Grip Diameter
0.437 inches -
End Application
F-22 raptor -
Thread Diameter
0.438 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt -
Material
Titanium alloy uns r56400 -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-137-0932 MPN NAS1666-18Electrical Connector Cable Clamp
- 5940-01-381-7166 MPN NAS1063B204-215Terminal Board Marker Strip
- 1560-01-650-3955 MPN 72007Aircraft Structural Component Fitting
- 5305-00-003-8161 MPN NAS1351-6-12PSocket Head Cap Screw
- 5305-00-008-7856 MPN NAS1742C04T6USocket Head Cap Screw
- 5305-00-045-7603 MPN MS24625-42Tapping Screw
- 5305-00-052-6456 MPN MS16996-10Socket Head Cap Screw
- 5305-00-058-4012 MPN NASM7839Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-488-2316 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6407U17 | National Aerospace Standards |