NSN 5306-01-489-5919
Coaxial Connector
Dry film lubricant per mil-l-46010, type i.
Manufacturer part number MS14181-04013L for national stock number 5306014895919.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-489-5919.
-
MPN or Model
MS14181-04013L
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.495 inches -
Fastener Length
Between 1.318 inches and 1.348 inches -
Head Style
Spline extended washer -
Head Height
Between 0.240 inches and 0.260 inches -
Extended Washer Diameter
Between 0.460 inches and 0.470 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Head Minor Diameter
Between 0.235 inches and 0.250 inches -
End Application
F-22 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.803 inches and 0.823 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response or ams5663 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-383-9955 MPN NAS1063A15-5MLSTerminal Board Marker Strip
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5935-00-153-4395 MPN NAS1642R16-24SNElectrical Receptacle Connector
- 5305-00-008-5914 MPN NAS1100E06-28Machine Screw
- 5305-00-052-8881 MPN MS24630-13Tapping Screw
- 5305-00-058-1538 MPN NAS662C0LN2Socket Head Cap Screw
- 5305-00-074-4517 MPN NAS1156-9Close Tolerance Screw
- 5305-00-150-3477 MPN NAS1300-08-8DThumbscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-489-5919 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS14181-04013L | National Aerospace Standards |
MS14181-04013L | Military Standards |
Stock Check
- NE: 2580
- NS: 5