NSN 5306-01-493-4159
Coaxial Connector
1.096 inches fastener length, 0.300 inches head height, between 0.2485 inches and 0.2495 inches grip diameter, single shear strength: 125000 pounds per square inch.
Manufacturer part number 95934-4-10 for national stock number 5306014934159.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-493-4159.
-
MPN or Model
95934-4-10
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
0.471 inches -
Fastener Length
1.096 inches -
Head Height
0.300 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Single Shear Strength
125000 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
26 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams 5962 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-357-1862 MPN HT4028L4-11Close Tolerance Screw
- 5305-00-481-0109 MPN 58950-3V29Machine Screw
- 5305-00-660-3027 MPN 53193-06-5Machine Screw
- 5305-00-817-4592 MPN NAS1101-06-6Machine Screw
- 5305-00-903-7076 MPN NAS1101-02-4Machine Screw
- 5305-00-928-9569 MPN NAS1101C02-3Machine Screw
- 5305-00-935-7513 MPN NAS1101-00-3Machine Screw
- 5305-01-049-2278 MPN HT4008-4-14Shoulder Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-493-4159 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
95934-4-10 | Sps Technologies, Llc |