NSN 5306-01-493-4160
Coaxial Connector
1.582 inches fastener length, 0.348 inches head height, between 0.3110 inches and 0.3120 inches grip diameter, single shear strength: 125000 pounds per square inch.
Manufacturer part number 95934-5-16 for national stock number 5306014934160.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-493-4160.
-
MPN or Model
95934-5-16
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
0.582 inches -
Fastener Length
1.582 inches -
Head Height
0.348 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Single Shear Strength
125000 pounds per square inch -
Thread Diameter
0.3125 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams 5962 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-046-9975 MPN BACB30LU2-4Close Tolerance Screw
- 5305-00-079-2587 MPN 73573-4-27CSocket Head Cap Screw
- 5305-00-136-7809 MPN 3M123-3-8Close Tolerance Screw
- 5305-00-225-9874 MPN SFH22-6A12Machine Screw
- 5305-00-541-9045 MPN NAS1221-3-2Machine Screw
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-00-833-5299 MPN BACS12BF02-6Machine Screw
- 5305-00-941-3614 MPN NAS1101C04H8Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-493-4160 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
95934-5-16 | Sps Technologies, Llc |