NSN 5306-01-512-5801
Coaxial Connector
Between 1.360 inches and 1.380 inches fastener length, double hexagon head style, between 0.316 inches and 0.317 inches grip diameter, thread diameter: 0.312 inches.
Manufacturer part number 9211M30P01 for national stock number 5306015125801.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-512-5801.
-
MPN or Model
9211M30P01
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Fastener Length
Between 1.360 inches and 1.380 inches -
Head Style
Double hexagon -
Grip Diameter
Between 0.316 inches and 0.317 inches -
End Application
Gas gen asssy -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Nickel alloy 718 -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-467-0666 MPN 1C6460G01Aircraft Maintenance Fixture
- 4820-00-894-5007 MPN 332C792P3Flow Control Valve
- 5905-00-907-3377 MPN R999P1250AInductive Wire Wound Fixed Resistor
- 5905-00-907-3394 MPN R984P1370AInductive Wire Wound Fixed Resistor
- 4920-00-994-9578 MPN 21C2652G001Aircraft Maintenance Fixture
- 4920-01-039-9943 MPN 21C995G001Slave Actuator
- 4920-01-065-1272 MPN 21C3703P010Aircraft Maintenance Fixture
- 4920-01-134-8579 MPN 1C4823G01Actuator Rod Fixture
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-512-5801 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9211M30P01 | General Electric Company |
Stock Check
- NS: 49
- AR: 20
- NE: 166
- SV: 1