NSN 5306-01-513-1092
Coaxial Connector
Between 3.772 inches and 3.792 inches fastener length, double hexagon w/hole head style, between 0.913 inches and 0.933 inches head height, width between flats: between 1.052 inches and 1.064 inches .
Manufacturer part number GB511GF16-39 for national stock number 5306015131092.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-513-1092.
-
MPN or Model
GB511GF16-39
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.345 inches -
Fastener Length
Between 3.772 inches and 3.792 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.913 inches and 0.933 inches -
Width Between Flats
Between 1.052 inches and 1.064 inches -
Extended Washer Diameter
Between 1.615 inches and 1.625 inches -
Extended Washer Thickness
0.222 inches -
Grip Diameter
Between 0.985 inches and 0.990 inches -
End Application
E-2c, hawkeye, aircraft -
Thread Diameter
1.000 inches -
Grip Length
Between 2.427 inches and 2.447 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams-qq-p-35 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-364-8277 MPN BACS12CK08U14Machine Screw
- 5305-01-452-6453 MPN LD111-0045-2407Close Tolerance Screw
- 5306-00-512-6420 MPN VEP220555-12-27Machine Bolt
- 5306-01-044-5194 MPN VAL23607-5D13Shoulder Bolt
- 5306-01-045-4194 MPN VAL23608-4-13Shoulder Bolt
- 5306-01-045-6584 MPN VAL23607-3-31Shoulder Bolt
- 5306-01-055-6918 MPN BACB30MT6-21Shear Bolt
- 5306-01-141-7183 MPN ST3M497-6-14Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-513-1092 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB511GF16-39 | Northrop Grumman Systems Corporation |
AIC578-16-39 | Sps Technologies, Llc |
GB511GF16-39 | Valley-todeco, Inc. |
GB511GF16-39 | Sps Technologies, Llc |
GB511GF16-39 | Sps Technologies, Llc |
GB511GF16-39 | Sps Technologies, Llc |