NSN 5306-01-513-4365
Coaxial Connector
Between 2.150 inches and 2.180 inches fastener length, double hexagon w/hole head style, between 0.425 inches and 0.445 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number GB511GF7-24 for national stock number 5306015134365.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-513-4365.
-
MPN or Model
GB511GF7-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.640 inches and 0.690 inches -
Fastener Length
Between 2.150 inches and 2.180 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.425 inches and 0.445 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Extended Washer Diameter
Between 0.740 inches and 0.750 inches -
Extended Washer Thickness
Between 0.089 inches and 0.109 inches -
Grip Diameter
Between 0.4630 inches and 0.4640 inches -
Single Shear Strength
19850 pounds per square inch -
Thread Diameter
0.438 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-386-2540 MPN VCL0009-3-14Machine Screw
- 5305-01-435-3454 MPN BACB30LU7-21Close Tolerance Screw
- 5305-01-513-9648 MPN ST3M557-5-7Close Tolerance Screw
- 5306-00-081-6591 MPN VFK100G-10024Shear Bolt
- 5306-00-149-8993 MPN VAL23611-5D010Close Tolerance Bolt
- 5306-00-343-9925 MPN STSBG004A06U027Shear Bolt
- 5306-01-044-2234 MPN VAL22034-6F20Shear Bolt
- 5306-01-054-3424 MPN C7521L6-9Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-513-4365 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB511GF7-24 | Northrop Grumman Systems Corporation |
GB511GF7-24 | Sps Technologies, Llc |
GB511GF7-24 | Valley-todeco, Inc. |
GB511GF7-24 | Sps Technologies, Llc |
GB511GF7-24 | Sps Technologies, Llc |