NSN 5306-01-520-3431
Close Tolerance Hex Head Bolt
Between 2.640 inches and 2.687 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number AN174C25A for national stock number 5306015203431.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-520-3431.
-
MPN or Model
AN174C25A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.468 inches -
Fastener Length
Between 2.640 inches and 2.687 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 2.172 inches and 2.204 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Thread Series Designator
Unf -
Specification Data
88044-an174 government standard
More from these suppliers
- 5935-00-199-3337 MPN AN3106A20-23PElectrical Plug Connector
- 5935-00-201-7064 MPN AN3106B20-4PElectrical Plug Connector
- 5935-00-222-7828 MPN AN3106A28-12PXElectrical Plug Connector
- 5935-00-549-7825 MPN AN3106A18-24SElectrical Plug Connector
- 5935-00-642-2663 MPN AN3106B24-11SElectrical Plug Connector
- 5935-00-666-1789 MPN AN3106A18-15PElectrical Plug Connector
- 5930-00-957-6034 MPN AN3022-9Toggle Switch
- 5935-01-239-4266 MPN AN3102A28-11SXElectrical Receptacle Connector
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-520-3431 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN174C25A | Aeronautical Standards Group |
Stock Check
- NE: 32
- NS: 7