NSN 5306-01-522-0666
Close Tolerance Hex Head Bolt
Threads .0156 oversize,restricted to repair work only.
Manufacturer part number VCG0009-4-12R for national stock number 5306015220666.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-522-0666.
-
MPN or Model
VCG0009-4-12R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
1.120 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Head Minor Diameter
Between 0.422 inches and 0.446 inches -
End Application
F-16 aircraft -
Thread Diameter
0.250 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
28 -
Part Name Assigned By Controlling Agency
Bolt, external wrenching, spline drive, 132 ksi shear -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-372-9982 MPN ST3M455-3L11-1Close Tolerance Screw
- 5305-01-051-4324 MPN BACS12GM3-16Machine Screw
- 5305-01-054-2530 MPN BACB30LU4-9Close Tolerance Screw
- 5305-01-209-7203 MPN BACB30LH3U27Close Tolerance Screw
- 5305-01-350-4207 MPN VCL0009-3D4Close Tolerance Screw
- 5305-01-412-6672 MPN LD111-0046-2416Close Tolerance Screw
- 5305-01-435-6313 MPN BACB30LU9-21Close Tolerance Screw
- 5305-01-475-3369 MPN 3M1170V3-18AClose Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
![Mechanic Bill explains Close Tolerance Hex Head Bolt](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-522-0666 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0009-4-12R | Valley-todeco, Inc. |
AIC596-4-12R | Sps Technologies, Llc |
H411-4-12R | Huck International, Inc. |
PBF7521-4-12R | Sps Technologies, Llc |
120978-4-12R | Sps Technologies, Llc |
120978-4-12R | Sps Technologies, Llc |
VS3133-4-12R | Alcoa Global Fasteners, Inc. |
C7521-4-12R | Lockheed Martin Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)