NSN 5306-01-524-0802
Coaxial Connector
Cadmium plate all put threaded portion.
Manufacturer part number 20-057C5-60D for national stock number 5306015240802.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-524-0802.
-
MPN or Model
20-057C5-60D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093483 - Bolts, Nuts Or Screws, NOI Iron Or -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.440 inches -
Fastener Length
4.375 inches -
Head Style
Hexagon -
Head Height
0.136 inches -
Width Between Flats
0.497 inches -
Hole Diameter
0.070 inches -
Grip Diameter
0.3110 inches -
End Application
Support of pre-provisioning items for which navicp phil acts as poe (e-nsn isil) -
Thread Diameter
0.312 inches -
Grip Length
3.758 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
190 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Bolt, shear, hex head, long thread -
Material
Iron alloy 660 -
Material Specification
Ams 5731 federal specification 1st material response or ams 5737 federal specification 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-036-0848 MPN AIC84-4-5Machine Screw
- 5305-01-056-4220 MPN AIC986-10-52Close Tolerance Screw
- 5305-01-056-4415 MPN AIC984-3-2PClose Tolerance Screw
- 5305-01-095-5707 MPN AIC870-08-7Socket Head Cap Screw
- 5305-01-101-3324 MPN HT4068-4-3AClose Tolerance Screw
- 5305-01-333-5420 MPN 1701-4-7Close Tolerance Screw
- 5305-01-417-2495 MPN TX1027D4-20Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-524-0802 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
20-057C5-60D | Bell Helicopter Textron Inc. |
20-057C5-60D | Sps Technologies, Llc |
20-057C5-60D | Arconic Global Fasteners & Rings, |
20-057C5-60D | Saturn Fasteners Inc |
20-057C5-60D | Heartland Precision Fasteners, Inc. |
20-057C5-60D | B & B Specialties Inc. |
20-057C5-60D | Sps Technologies, Llc |
20-057C5-60D | Sps Technologies, Llc |
20-057C5-60D | Lfc Industries Inc. |
20-057C5-60D | Sps Technologies, Llc |