NSN 5306-01-526-3900
Close Tolerance Hex Head Bolt
Between 1.076 inches and 1.123 inches fastener length, spline drive shear head head style, 0.187 inches head height, grip diameter: 0.311 inches .
Manufacturer part number ST3M747-5H10 for national stock number 5306015263900.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-526-3900.
-
MPN or Model
ST3M747-5H10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
0.467 inches -
Fastener Length
Between 1.076 inches and 1.123 inches -
Head Style
Spline drive shear head -
Head Height
0.187 inches -
Grip Diameter
0.311 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Head Minor Diameter
0.517 inches -
End Application
Fighter aircraft - first (f18 e/f) -
Grip Length
Between 0.615 inches and 0.635 inches -
Criticality Code Justification
Agav -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.973 inches first hole -
Material
Steel comp xm-13 -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-414-3672 MPN VCL009-8-36Close Tolerance Screw
- 5305-01-417-2491 MPN 3M1169V4-19AClose Tolerance Screw
- 5305-01-435-2933 MPN BACB30LU5-13Close Tolerance Screw
- 5305-01-579-9838 MPN ST3M557-9-16Close Tolerance Screw
- 5306-00-001-4699 MPN GB511H-4-14Shear Bolt
- 5306-00-357-1907 MPN VAL23029-9D19Close Tolerance Bolt
- 5306-00-922-6433 MPN 491849Externally Relieved Body Bolt
- 5306-01-045-5568 MPN VAL23033-4X7Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-526-3900 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M747-5H10 | Boeing Company, The |
VCG0002-5H10 | Valley-todeco, Inc. |
AIC688-5H10 | Sps Technologies, Llc |
HP7747-5H10 | Heartland Precision Fasteners, Inc. |
PBF1266-5H10 | Sps Technologies, Llc |
ST3M747-5H10 | Fastener Innovation Technology, Inc. |
S397-5H10 | Huck International, Inc. |
122896-5H10 | Sps Technologies, Llc |
122896-5H10 | Sps Technologies Inc |
SLB254-5H10 | Space-lok, Inc. |
GS1031-5H10 | B & B Specialties Inc. |
MB155-5H10 | Hi-shear Corporation |
122896-5H10 | Sps Technologies, Llc |
ST3M747-5H10 | Houston Precision Fasteners I, Lp |