NSN 5306-01-526-9968
Coaxial Connector
Between 1.7155 inches and 1.8705 inches fastener length, spline drive shear head head style, 0.257 inches head height, grip diameter: between 0.671 inches and 0.703 inches .
Manufacturer part number AIC596L7-19 for national stock number 5306015269968.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-526-9968.
-
MPN or Model
AIC596L7-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.528 inches and 0.683 inches -
Fastener Length
Between 1.7155 inches and 1.8705 inches -
Head Style
Spline drive shear head -
Head Height
0.257 inches -
Grip Diameter
Between 0.671 inches and 0.703 inches -
Head Minor Diameter
0.828 inches -
Thread Diameter
0.4375 inches -
Grip Length
Between 1.1775 inches and 1.1975 inches -
Features Provided
Dry film lubricant -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
23200 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, external wrenching -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-055-3807 MPN BACB30LU6-8Close Tolerance Screw
- 5305-01-056-4415 MPN AIC984-3-2Close Tolerance Screw
- 5305-01-135-1154 MPN LS15266V4-13Close Tolerance Screw
- 5305-01-195-0285 MPN BACB30LU3D4Close Tolerance Screw
- 5305-01-235-2025 MPN 3M925C5-13AClose Tolerance Screw
- 5305-01-293-1764 MPN AIC812-3-20Machine Screw
- 5305-01-397-8808 MPN AIC618-4-17Close Tolerance Screw
- 5305-01-435-8304 MPN BACB30LU6-62Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-526-9968 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC596L7-19 | Sps Technologies, Llc |