NSN 5306-01-527-7360
Coaxial Connector
Between 3.660 inches and 3.705 inches fastener length, hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: 0.439 inches .
Manufacturer part number NAS6604D50 for national stock number 5306015277360.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-527-7360.
-
MPN or Model
NAS6604D50
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 3.535 inches and 3.565 inches -
Fastener Length
Between 3.660 inches and 3.705 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
0.439 inches -
Grip Diameter
Between 0.388 inches and 0.408 inches -
Thread Diameter
0.250 inches -
Grip Length
3.550 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp 4140 or steel comp 4340 or steel comp e4340 or steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-6521 MPN NAS1063A15-406Terminal Board Marker Strip
- 5305-00-007-6198 MPN NAS1631E26PMachine Screw
- 5305-00-051-2355 MPN NAS514P832-28Machine Screw
- 5305-00-052-6885 MPN MS35198-45Machine Screw
- 5305-00-059-3666 MPN MS51958-70Machine Screw
- 5305-00-059-8243 MPN MS35214-18Machine Screw
- 5305-00-067-9847 MPN MS24693-S119Machine Screw
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-527-7360 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6604D50 | National Aerospace Standards |