NSN 5306-01-536-2558
Coaxial Connector
0.925 inches fastener length, dished hexagon head style, 0.117 inches head height, width between flats: 0.367 inches .
Manufacturer part number NAS63027DH for national stock number 5306015362558.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-536-2558.
-
MPN or Model
NAS63027DH
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
0.925 inches -
Head Style
Dished hexagon -
Head Height
0.117 inches -
Width Between Flats
0.367 inches -
Grip Diameter
0.1895 inches -
Thread Diameter
0.1900 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4140 -
Thread Series Designator
Unjf
More from these suppliers
- 5975-00-074-2072 MPN NAS1352C6-08Electrical Components Tiedown Strap
- 5305-00-008-7871 MPN NAS1191E04P3LSocket Head Cap Screw
- 5305-00-055-6173 MPN NAS1351C3LE8PSocket Head Cap Screw
- 5305-00-057-4913 MPN MS24671-29Socket Head Cap Screw
- 5305-00-108-9804 MPN NAS1351-5LE16Socket Head Cap Screw
- 5305-00-115-9407 MPN NAS1100E06-70PMachine Screw
- 5305-00-147-6253 MPN MS24673-19Socket Head Cap Screw
- 5305-00-151-5795 MPN MS35206-320Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-536-2558 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS63027DH | National Aerospace Standards |