NSN 5306-01-536-6648
Coaxial Connector
3.041 inches fastener length, hexagon head style, 0.375 inches head height, width between flats: between 1.052 inches and 1.064 inches .
Manufacturer part number NAS1962-26D for national stock number 5306015366648.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-536-6648.
-
MPN or Model
NAS1962-26D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
1.041 inches -
Fastener Length
3.041 inches -
Head Style
Hexagon -
Head Height
0.375 inches -
Width Between Flats
Between 1.052 inches and 1.064 inches -
Grip Diameter
Between 0.748 inches and 0.749 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
71100 pounds per square inch -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-525-4452 MPN NAS25-3KRTank Strap Trunnion
- 5305-00-004-5096 MPN NAS1351-4-18PSocket Head Cap Screw
- 5305-00-059-9567 MPN NAS1221-4-13Machine Screw
- 5305-00-079-2588 MPN NAS1154-29Close Tolerance Screw
- 5305-00-079-7978 MPN MS24694S196Machine Screw
- 5305-00-159-5545 MPN NAS1101C04-10Machine Screw
- 5305-00-225-4596 MPN MS24694A58Machine Screw
- 5305-00-269-4213 MPN MS24694S155Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-536-6648 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1962-26D | National Aerospace Standards |