NSN 5306-01-542-3925
Coaxial Connector
1.237 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30LM4D13 for national stock number 5306015423925.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-542-3925.
-
MPN or Model
BACB30LM4D13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
1.237 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches all holes and 0.066 inches all holes -
Thread Diameter
0.250 inches -
Grip Length
0.812 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.222 inches all holes and 4.272 inches all holes -
Surface Finish
32.0 microinches bearing surface of head -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-131-7559 MPN ST3M714-6-13Close Tolerance Screw
- 5305-01-235-2025 MPN 3M925C5-13AClose Tolerance Screw
- 5305-01-435-0183 MPN BACB30LU14-49Close Tolerance Screw
- 5305-01-435-3022 MPN BACB30LU6-22Close Tolerance Screw
- 5305-01-477-5761 MPN 3M1169V5-17AClose Tolerance Screw
- 5305-01-492-4577 MPN 3M1170C4-4AFClose Tolerance Screw
- 5305-01-622-4001 MPN BACS12CK06-3Machine Screw
- 5306-01-025-6434 MPN VAL23029-4-18Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-542-3925 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM4D13 | The Boeing Company |
BACB30LM4D13 | Sps Technologies, Llc |
BACB30LM4D13 | Valley-todeco, Inc. |
BACB30LM4D13 | Arconic Global Fasteners & Rings, |
BACB30LM4D13 | Federal Manufacturing Corporation |
BACB30LM4D13 | Deutsch Co The |
BACB30LM4D13 | Sps Technologies, Llc |
BACB30LM4D13 | Sps Technologies, Llc |
BACB30LM4D13 | Alcoa Global Fasteners, Inc. |
Stock Check
![](/public/images/partscage_shelf3.png)