NSN 5306-01-545-8392
Close Tolerance Hex Head Bolt
4.992 inches fastener length, spline drive shear head head style, 0.468 inches head height, grip diameter: between 0.8770 inches and 0.8775 inches .
Manufacturer part number 200610015-01 for national stock number 5306015458392.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-545-8392.
-
MPN or Model
200610015-01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.992 inches -
Fastener Length
4.992 inches -
Head Style
Spline drive shear head -
Head Height
0.468 inches -
Grip Diameter
Between 0.8770 inches and 0.8775 inches -
Head Minor Diameter
1.414 inches -
Thread Diameter
0.8750 inches -
Grip Length
4.000 inches -
Thready Qty Per Inch (tpi)
18 -
Part Name Assigned By Controlling Agency
Bolt -
Material
Steel comp h11 -
Surface Treatment
Chromium grip -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-130-6555 MPN SC2671-3-10Machine Screw
- 5305-01-476-0835 MPN BACS12CK06-19Machine Screw
- 5305-01-528-8397 MPN 3M1170C4-10AClose Tolerance Screw
- 5305-01-622-4001 MPN BACS12CK06-3Machine Screw
- 5306-00-876-1391 MPN GB511B4-8Shear Bolt
- 5306-00-945-0556 MPN GB511C8-16Shear Bolt
- 5306-00-958-8387 MPN STSBG003A12U026Shear Bolt
- 5306-01-004-9474 MPN 327B455P23Machine Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-545-8392 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
200610015-01 | Ogden Air Logistics Center |
2978-14 | Arconic Global Fasteners & Rings, |
23611-14 | Valley-todeco, Inc. |
1000-14 | B & B Specialties Inc. |
1041-14 | Sps Technologies, Llc |
68484-14-64 | Sps Technologies, Llc |