NSN 5306-01-552-4332
Coaxial Connector
Between 1.621 inches and 1.646 inches fastener length, flat chamfer head style, 1.018 inches head diameter, head height: 0.140 inches .
Manufacturer part number TL110-9-30 for national stock number 5306015524332.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4332.
-
MPN or Model
TL110-9-30
-
Thread Length
Between 1.100 inches and 1.395 inches -
Fastener Length
Between 1.621 inches and 1.646 inches -
Head Style
Flat chamfer -
Head Diameter
1.018 inches -
Head Height
0.140 inches -
Grip Diameter
Between 0.3319 inches and 0.3547 inches -
Thread Diameter
0.5625 inches -
Grip Length
Between 1.240 inches and 1.255 inches -
Thready Qty Per Inch (tpi)
18 -
Part Name Assigned By Controlling Agency
Bolt-taper, shank, shear, 100 degree head type, oversize
More from these suppliers
- 5305-00-761-3731 MPN NAS1101-3-6Machine Screw
- 5305-01-176-2462 MPN BACB30LH3-2Close Tolerance Screw
- 5305-01-319-9443 MPN PBF1417-4-18AClose Tolerance Screw
- 5305-01-462-2832 MPN TX1026V4-10AClose Tolerance Screw
- 5305-01-512-8411 MPN TX1027C3-5AFClose Tolerance Screw
- 5305-01-627-7379 MPN JSFB38-9-42DMachine Screw
- 5306-00-294-9727 MPN ST3M571-8D40Shear Bolt
- 5306-00-470-8723 MPN STSBG002A08U016Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4332 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TL110-9-30 | Sps Technologies, Llc |
TL110-9-30 | Reid Products Inc. |