NSN 5305-01-090-6337
High Torque Screw
Between 1.722 inches and 1.752 inches fastener length, flat countersunk head style, between 0.455 inches and 0.510 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number BACB30LR4-21 for national stock number 5305010906337.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-090-6337.
-
MPN or Model
BACB30LR4-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 1.722 inches and 1.752 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.455 inches and 0.510 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-020-9617 MPN ST3M454-3L11Close Tolerance Screw
- 5305-01-169-0016 MPN LD111-044-2405Close Tolerance Screw
- 5305-01-174-3528 MPN BACS12CK3U12Machine Screw
- 5305-01-431-9982 MPN VCL0009-3-5Close Tolerance Screw
- 5306-00-131-7216 MPN VFK100G-06034Shear Bolt
- 5306-00-420-8245 MPN STSBG002A06U024Shear Bolt
- 5306-00-458-1871 MPN BACB30EK5-11CShear Bolt
- 5306-00-762-2904 MPN VFK100G-06024Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Pricing and Availability
Get a quote for 5305-01-090-6337 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LR4-21 | The Boeing Company |
BACB30LR4-21 | Sps Technologies, Llc |
BACB30LR4-21 | Valley-todeco, Inc. |
BACB30LR4-21 | Federal Manufacturing Corporation |
BACB30LR4-21 | Arconic Global Fasteners & Rings, |
BACB30LR4-21 | Sps Technologies, Llc |
BACB30LR4-21 | Sps Technologies, Llc |
BACB30LR4-21 | Huck Intl Inc |
BACB30LR4-21 | Huck International, Inc. |
Stock Check
