NSN 5306-01-552-4333
Coaxial Connector
Between 2.171 inches and 2.196 inches fastener length, flat chamfer head style, 1.018 inches head diameter, head height: 0.140 inches .
Manufacturer part number TL110-9-28 for national stock number 5306015524333.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4333.
-
MPN or Model
TL110-9-28
-
Thread Length
Between 1.600 inches and 1.895 inches -
Fastener Length
Between 2.171 inches and 2.196 inches -
Head Style
Flat chamfer -
Head Diameter
1.018 inches -
Head Height
0.140 inches -
Grip Diameter
Between 0.3358 inches and 0.3690 inches -
Thread Diameter
0.5625 inches -
Grip Length
Between 1.740 inches and 1.755 inches -
Thready Qty Per Inch (tpi)
18 -
Part Name Assigned By Controlling Agency
Bolt-taper, shank, shear, 100 degree head type, oversize
More from these suppliers
- 5305-01-054-4637 MPN BACB30LK3-3Close Tolerance Screw
- 5305-01-246-3864 MPN PBF1069-170CSocket Head Cap Screw
- 5305-01-364-8276 MPN BACS12FA3K5Machine Screw
- 5305-01-494-0616 MPN TX1024C4-3-6AClose Tolerance Screw
- 5305-01-512-8378 MPN TX1026C4D14AClose Tolerance Screw
- 5305-01-512-8414 MPN TX1027C3-7AFClose Tolerance Screw
- 5305-01-627-4200 MPN JSFB34V3-38Machine Screw
- 5305-01-646-1379 MPN JSFB12V3L6Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4333 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TL110-9-28 | Sps Technologies, Llc |
TL110-9-28 | Reid Products Inc. |