NSN 5306-01-552-4346
Coaxial Connector
Between 1.322 inches and 1.347 inches fastener length, flat chamfer head style, 0.613 inches head diameter, head height: 0.081 inches .
Manufacturer part number TLH110-6-16 for national stock number 5306015524346.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4346.
-
MPN or Model
TLH110-6-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.909 inches and 1.086 inches -
Fastener Length
Between 1.322 inches and 1.347 inches -
Head Style
Flat chamfer -
Head Diameter
0.613 inches -
Head Height
0.081 inches -
Grip Diameter
Between 0.2707 inches and 0.2884 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.990 inches and 1.005 inches -
Features Provided
Cetyl alcohol lubricant -
Thready Qty Per Inch (tpi)
24 -
Part Name Assigned By Controlling Agency
Bolt-taper shank, shear, 100 degree head type, oversize -
Material
Steel -
Material Specification
-56487 federal specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams6487 assn standard 1st treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-316-8140 MPN ST3M455-3L3-1Close Tolerance Screw
- 5305-00-802-3092 MPN 51B223-11HMachine Screw
- 5305-01-070-9156 MPN PBF1165-5-7Close Tolerance Screw
- 5305-01-191-3126 MPN C9535-7-34Close Tolerance Screw
- 5305-01-502-6059 MPN TX1024C4D14-6AClose Tolerance Screw
- 5305-01-512-8375 MPN TX1026D4D16AClose Tolerance Screw
- 5305-01-541-5189 MPN 120-265E4P2Mate Aircraft Screw
- 5305-01-627-4190 MPN JSFB34V3-34Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4346 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLH110-6-16 | Sps Technologies, Llc |
TLH110-6-16 | Reid Products Inc. |