NSN 5306-01-552-4347
Coaxial Connector
Between 2.943 inches and 2.968 inches fastener length, 1.018 inches head diameter, 0.140 inches head height, grip diameter: between 0.4610 inches and 0.5091 inches .
Manufacturer part number TLH110-9-40 for national stock number 5306015524347.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4347.
-
MPN or Model
TLH110-9-40
-
Thread Length
Between 2.350 inches and 2.645 inches -
Fastener Length
Between 2.943 inches and 2.968 inches -
Head Diameter
1.018 inches -
Head Height
0.140 inches -
Grip Diameter
Between 0.4610 inches and 0.5091 inches -
Thread Diameter
0.8625 inches -
Grip Length
Between 2.490 inches and 2.645 inches -
Thready Qty Per Inch (tpi)
18 -
Part Name Assigned By Controlling Agency
Bolt-taper, shank, shear, 100 degree head type, oversize
More from these suppliers
- 5305-01-329-9960 MPN 03A292-3-19Machine Screw
- 5305-01-381-5755 MPN PBF1417-5-45Close Tolerance Screw
- 5305-01-500-8240 MPN TX1027D3-5AClose Tolerance Screw
- 5305-01-512-8414 MPN TX1027D3-7AFClose Tolerance Screw
- 5305-01-627-7246 MPN JSFB38-7-21DMachine Screw
- 5305-01-670-1604 MPN BACB30NN3K6Close Tolerance Screw
- 5306-00-126-5149 MPN BACB30FD9-34Shear Bolt
- 5306-00-332-4467 MPN ST3M571-4-12Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4347 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLH110-9-40 | Sps Technologies, Llc |
TLH110-9-40 | Reid Products Inc. |