NSN 5306-01-552-4352
Coaxial Connector
Between 1.700 inches and 1.725 inches fastener length, 0.824 inches head diameter, 0.110 inches head height, grip diameter: between 0.6048 inches and 0.6230 inches .
Manufacturer part number TLH110-8-18 for national stock number 5306015524352.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4352.
-
MPN or Model
TLH110-8-18
-
Thread Length
Between 1.005 inches and 1.240 inches -
Fastener Length
Between 1.700 inches and 1.725 inches -
Head Diameter
0.824 inches -
Head Height
0.110 inches -
Grip Diameter
Between 0.6048 inches and 0.6230 inches -
Grip Length
Between 1.115 inches and 1.130 inches -
Part Name Assigned By Controlling Agency
Bolt-taper, shank, shear 100 degree head type, oversize
More from these suppliers
- 5305-00-021-7245 MPN NAS1101-3H9Machine Screw
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-01-054-6260 MPN PBF1166-3-5Close Tolerance Screw
- 5305-01-096-1240 MPN PBF1069-319CSocket Head Cap Screw
- 5305-01-114-5133 MPN NAS1101E4-26Machine Screw
- 5305-01-217-2185 MPN BACB30LU8-8Close Tolerance Screw
- 5305-01-381-0914 MPN PBF1198-6-31Close Tolerance Screw
- 5305-01-481-0079 MPN TX1026D4-32AClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4352 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLH110-8-18 | Sps Technologies, Llc |
TLH110-8-18 | Reid Products Inc. |