NSN 5306-01-552-5727
Coaxial Connector
Between 2.325 inches and 2.350 inches fastener length, 0.845 inches head diameter, 0.110 inches head height, grip diameter: between 0.6178 inches and 0.6542 inches .
Manufacturer part number TLH110-8-32 for national stock number 5306015525727.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-5727.
-
MPN or Model
TLH110-8-32
-
Thread Length
Between 1.880 inches and 2.105 inches -
Fastener Length
Between 2.325 inches and 2.350 inches -
Head Diameter
0.845 inches -
Head Height
0.110 inches -
Grip Diameter
Between 0.6178 inches and 0.6542 inches -
Grip Length
Between 1.990 inches and 1.995 inches -
Part Name Assigned By Controlling Agency
Bolt-taper, shank, shear 100 degree head type, oversize
More from these suppliers
- 5305-00-316-6848 MPN PBF1069-204CSocket Head Cap Screw
- 5305-00-419-0861 MPN NAS1101-6-10WMachine Screw
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-00-823-5808 MPN NAS1102-06-12Machine Screw
- 5305-00-855-7908 MPN NAS1102-02-3Machine Screw
- 5305-00-954-6087 MPN NAS1102-06-9Machine Screw
- 5305-01-044-0725 MPN PBF1068-210CMachine Screw
- 5305-01-193-2379 MPN PBF1356V08-3Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-5727 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLH110-8-32 | Sps Technologies, Llc |
TLH110-8-32 | Reid Products Inc. |