1-321-802-5889
Email Us

NSN 5306-01-060-6844

Close Tolerance Hex Head Bolt

About this product

Dry film lube per mil-h-8937b on bearing surface of head and grip.

Manufacturer part number AIC596-6DN27 for national stock number 5306010606844.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-060-6844.

  • MPN or Model

    AIC596-6DN27

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    0.454 inches
  • Fastener Length
    Between 2.132 inches and 2.152 inches
  • Head Style
    Spline drive shear head
  • Head Height
    0.210 inches
  • Grip Diameter
    Between 0.3733 inches and 0.3742 inches
  • Shank Unthreaded Hole Diameter
    0.106 inches first hole
  • Head Minor Diameter
    0.679 inches
  • Thread Diameter
    0.375 inches
  • Grip Length
    Between 1.678 inches and 1.698 inches
  • Thready Qty Per Inch (tpi)
    24
  • Min. Tensile Strength (psi)
    220000 pounds per square inch
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    1.920 inches first hole and 1.940 inches first hole
  • Material
    Steel
  • Material Specification
    Ams6487 assn standard single material response
  • Surface Treatment
    Cadmium top of head
  • Surface Treatment Specification
    Nas672 national specification single treatment response top of head
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-060-6844 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306010606844

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
AIC596-6DN27 Sps Technologies, Llc
PBF7521-6DN27 Sps Technologies, Llc
VCG0009-6DN27 Valley-todeco, Inc.
H411-6DN27 Huck International, Inc.
120978-6D27N Sps Technologies, Llc
120978-6D27N Sps Technologies, Llc
VS3133-6DN27 Alcoa Global Fasteners, Inc.
C7521-6DN27 Lockheed Martin Corporation
VS3133-6DN27 Arconic Global Fasteners & Rings,
C7521-6DN27 Valley-todeco, Inc.
C7521-6DN27 Sps Technologies, Llc
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.