NSN 5306-01-561-6833
Coaxial Connector
4.954 inches fastener length, hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.554 inches and 0.564 inches .
Manufacturer part number NAS6306-72 for national stock number 5306015616833.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-561-6833.
-
MPN or Model
NAS6306-72
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
4.954 inches -
Head Style
Hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
Between 0.373 inches and 0.374 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 4.490 inches and 4.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-425-6042 MPN NAS1063A5-437Terminal Board Marker Strip
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5905-01-160-8642 MPN NAS1330S6E-381Resistance Element
- 5305-00-051-2336 MPN NASM51958Machine Screw
- 5305-00-068-7053 MPN NASM35202-43Machine Screw
- 5305-00-071-3220 MPN NAS517-6-46Machine Screw
- 5305-00-079-1751 MPN NAS1101C3-26Machine Screw
- 5305-00-146-7126 MPN MS35214-137Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-561-6833 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6306-72 | National Aerospace Standards |
Stock Check
- NE: 28