NSN 5306-01-567-5557
Coaxial Connector
1.688 inch long.
Manufacturer part number NAS6205-20H for national stock number 5306015675557.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-567-5557.
-
MPN or Model
NAS6205-20H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.436 inches -
Fastener Length
1.985 inches -
Head Style
Dished hexagon -
Width Between Flats
0.497 inches -
End Application
Eh101 helicopter -
Thread Diameter
0.304 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c -
Surface Finish
32.0 microinches -
Part Name Assigned By Controlling Agency
Shear bolt -
Material
Steel comp 4140 -
Material Specification
Ams6349 federal specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-ap-416 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6205 professional/industrial association standard
More from these suppliers
- 5940-01-425-6521 MPN NAS1063A15-406Terminal Board Marker Strip
- 1680-01-571-7708 MPN 10367-A-1032-17Controller Handle
- 5305-00-008-5920 MPN NAS1190E04T5LSocket Head Cap Screw
- 5305-00-058-4010 MPN MS24694S118Machine Screw
- 5305-00-063-3503 MPN MS24693-S50Machine Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-207-8737 MPN NAS336PA17Machine Screw
- 5305-00-267-9690 MPN MS90726-23Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-567-5557 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6205-20H | National Aerospace Standards |