NSN 5305-00-119-4634
High Torque Screw
Between 1.564 inches and 1.594 inches fastener length, flat countersunk head style, between 0.704 inches and 0.762 inches head diameter, grip diameter: between 0.3731 inches and 0.3737 inches .
Manufacturer part number NAS1156V19 for national stock number 5305001194634.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-119-4634.
-
MPN or Model
NAS1156V19
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.366 inches and 0.416 inches -
Fastener Length
Between 1.564 inches and 1.594 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.704 inches and 0.762 inches -
Grip Diameter
Between 0.3731 inches and 0.3737 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r54520 -
Material Specification
Nas 621 comp 6al-4v assn standard single material response or ams 4928 assn standard 2nd material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5940-01-381-7077 MPN NAS1063B180-191Terminal Board Marker Strip
- 1680-01-651-3558 MPN 411N1281-4CRoller Shade
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5305-00-174-8685 MPN NAS1216-08E24Machine Screw
- 5305-00-205-3919 MPN NAS1218-3E6Machine Screw
- 5305-00-225-8476 MPN MS24693-S144Machine Screw
- 5305-00-282-3555 MPN NAS221DD13Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-119-4634 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1156V19 | National Aerospace Standards |