NSN 5306-01-570-7381
Coaxial Connector
Between 2.204 inches and 2.234 inches fastener length, dished hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.679 inches and 0.690 inches .
Manufacturer part number NAS1307-26D for national stock number 5306015707381.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-570-7381.
-
MPN or Model
NAS1307-26D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 2.204 inches and 2.234 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.437 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.018 inches first hole -
Material
Steel comp 4340 or steel comp 8740 -
Material Specification
Ams 6415 assn standard 1st material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty ii, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-348-4727 MPN NAS1063C7-1Terminal Board
- 5305-00-007-1556 MPN NAS1100E02-3PMachine Screw
- 5305-00-045-4832 MPN NAS1352-08H4PSocket Head Cap Screw
- 5305-00-052-5941 MPN MS35198-83Machine Screw
- 5305-00-059-3667 MPN MS51958-71Machine Screw
- 5305-00-104-7608 MPN NAS1352C3LN40Socket Head Cap Screw
- 5305-00-124-9781 MPN NAS1624-12Machine Screw
- 5305-00-150-9262 MPN MILS7839Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-570-7381 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1307-26D | National Aerospace Standards |
Stock Check
- NS: 25
- NE: 9012