NSN 5306-01-604-8278
Coaxial Connector
0.345 inches fastener length, hexagon head style, between 0.110 inches and 0.115 inches head height, width between flats: 0.19 inches .
Manufacturer part number BACB30LM3K3 for national stock number 5306016048278.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-604-8278.
-
MPN or Model
BACB30LM3K3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.1900 inches -
Fastener Length
0.345 inches -
Head Style
Hexagon -
Head Height
Between 0.110 inches and 0.115 inches -
Width Between Flats
0.19 inches -
Grip Diameter
Between 0.181 inches and 0.184 inches -
End Application
E-3 block 404 -
Thread Diameter
0.367 inches -
Grip Length
0.345 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Stainless steel -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams qq-c-3230, class 2 assn standard single treatment response -
Thread Series Designator
Unj
More from these suppliers
- 1560-00-099-2136 MPN 6-36598Swivel Joint Mounting Bracket
- 1680-00-301-7903 MPN 8-7574-1Aircraft Sun Visor
- 1560-00-327-0687 MPN 6-73186Fl Emergency Spacer
- 1560-00-620-7552 MPN 65-8808-4Boom Telescoping Tube Guard
- 1560-00-670-1459 MPN 25-2610-821Surge Bleed Air Duct
- 1560-00-670-5595 MPN 36-2795-802Aircraft Structural Plate
- 1560-00-672-1272 MPN 5-89347-14Lower Trailing Ed Panel Assembly
- 1560-00-675-0310 MPN 69-5022-1Carpet Trim Channel
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-604-8278 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM3K3 | The Boeing Company |
BACB30LM | The Boeing Company |
BACB30LM3K3 | The Boeing Company |
BACB30LM | The Boeing Company |
BACB30LM3K3 | The Boeing Company |
BACB30LM | The Boeing Company |
BACB30LM3K3 | The Boeing Company |
BACB30LM | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)