NSN 5306-01-625-8704
Close Tolerance Hex Head Bolt
Between 3.130 inches and 3.160 inches fastener length, hexagon head style, 0.500 inches head height, width between flats: between 1.427 inches and 1.440 inches .
Manufacturer part number NAS6216-36Y for national stock number 5306016258704.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-625-8704.
-
MPN or Model
NAS6216-36Y
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.895 inches -
Fastener Length
Between 3.130 inches and 3.160 inches -
Head Style
Hexagon -
Head Height
0.500 inches -
Width Between Flats
Between 1.427 inches and 1.440 inches -
Grip Diameter
1.030 inches -
Point Diameter
Between 0.9860 inches and 0.9930 inches -
Point Style
Flat -
Thread Diameter
1.000 inches -
Grip Length
Between 2.240 inches and 2.260 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, close tolerance -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Ams6349 assn standard 1st material response or ams6389 assn standard 2nd material response or ams6415 assn standard 3rd material response or ams6484 assn standard 4th material response or ams6322 assn standard 5th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-qq-p-416, type ii, class 2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-517-5412 MPN SAE AS50151Electrical Receptacle Connector
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-033-7683 MPN NAS1352C06-20Socket Head Cap Screw
- 5305-00-053-8081 MPN MS24677-112Socket Head Cap Screw
- 5305-00-066-7324 MPN MS24694C64Machine Screw
- 5305-00-069-5585 MPN MS90725-101Hexagon Head Cap Screw
- 5305-00-085-4056 MPN MS3212-39Machine Screw
- 5305-00-104-5098 MPN NAS1635-3LE6Socket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-625-8704 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6216-36Y | National Aerospace Standards |