NSN 5306-01-625-8745
Coaxial Connector
Between 4.443 inches and 4.473 inches fastener length, spline extended washer head style, 0.562 inches head height, extended washer diameter: between 1.153 inches and 1.163 inches .
Manufacturer part number MS21297-10055 for national stock number 5306016258745.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-625-8745.
-
MPN or Model
MS21297-10055
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.005 inches -
Fastener Length
Between 4.443 inches and 4.473 inches -
Head Style
Spline extended washer -
Head Height
0.562 inches -
Extended Washer Diameter
Between 1.153 inches and 1.163 inches -
Extended Washer Thickness
Between 0.080 inches and 0.100 inches -
Grip Diameter
Between 0.623 inches and 0.624 inches -
Head Minor Diameter
Between 0.673 inches and 0.688 inches -
End Application
F-16 -
Thread Diameter
0.625 inches -
Grip Length
Between 3.428 inches and 3.448 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt tension steel, external wrenching, spline drive, flanged head -
Material
Steel comp h11 -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-051-2328 MPN MS51958-97Machine Screw
- 5305-00-057-3663 MPN NAS1352-6LE12PSocket Head Cap Screw
- 5305-00-059-4568 MPN MS35190-253Machine Screw
- 5305-00-116-5024 MPN NAS1100C6-16Machine Screw
- 5305-00-128-1996 MPN MS27039-4-27Machine Screw
- 5305-00-141-7207 MPN NAS1155V34Close Tolerance Screw
- 5305-00-165-8074 MPN MS51095-420Hexagon Head Cap Screw
- 5305-00-186-9211 MPN NAS1704-26Shoulder Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-625-8745 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-10055 | National Aerospace Standards |
MS21297-10055 | Lockheed Martin Corporation |