NSN 5306-01-626-6163
Close Tolerance Hex Head Bolt
Between 0.753 inches and 0.800 inches fastener length, spline drive shear head head style, 0.328 inches head height, hole diameter: 0.140 inches .
Manufacturer part number ST3M747-3H7 for national stock number 5306016266163.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-626-6163.
-
MPN or Model
ST3M747-3H7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.331 inches -
Fastener Length
Between 0.753 inches and 0.800 inches -
Head Style
Spline drive shear head -
Head Height
0.328 inches -
Hole Diameter
0.140 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Point Diameter
0.1885 inches -
Head Minor Diameter
0.386 inches -
Point Style
Flat -
End Application
F-15sa -
Thread Diameter
0.1900 inches -
Grip Length
0.438 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Hole Configuration Style
Spline -
Part Name Assigned By Controlling Agency
Bolt, close tolerance, spline drive, cres (125 ksi fsu) -
Material
Steel comp xm-13 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-212-5213 MPN ST3M454-3DL17Close Tolerance Screw
- 5305-01-339-1417 MPN BACB30NT2K4Close Tolerance Screw
- 5305-01-431-9982 MPN VCL0009-3-5Close Tolerance Screw
- 5305-01-435-5747 MPN BACB30LU8-25Close Tolerance Screw
- 5305-01-512-8385 MPN TX1024C4-2-5AClose Tolerance Screw
- 5306-00-060-7930 MPN VAL12001-4Machine Bolt
- 5306-00-144-0302 MPN VFK100G-05042Shear Bolt
- 5306-00-406-5603 MPN VAL26001-5-42Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-626-6163 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M747-3H7 | Boeing Company, The |
VCG0002-3H7 | Valley-todeco, Inc. |
AIC688-3H7 | Sps Technologies, Llc |
PBF1266-3H7 | Sps Technologies, Llc |
MB155-3H7 | Hi-shear Corporation |
Stock Check
- NE: 1