NSN 5925-01-175-5720
Overload Switch
Multipole-multiple actuator type body style, plastic case material, single pole, double throw switch contact arrangement, pole quantity: 2.
Manufacturer part number 205-11-1REC2-42F-3-501A-M-O for national stock number 5925011755720.
Datasheet
-
Product description
Circuit Breaker NSN 5925-01-175-5720.
-
MPN or Model
205-11-1REC2-42F-3-501A-M-O
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
Body Style
Multipole-multiple actuator type -
Body Length
2.490 inches -
Body Width
1.500 inches -
Case Material
Plastic -
Center To Center Distance Between Terminals Parallel To Length
1.940 inches -
Center To Center Distance Between Terminals Parallel To Width
0.750 inches -
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
2.060 inches -
Switch Contact Arrangement
Single pole, double throw -
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
0.750 inches -
Boss Height
0.150 inches -
Mounting Surface To Terminal End Distance
2.755 inches -
Pole Quantity
2 -
Mounting Facility Type And Quantity
4 threaded hole -
Features Provided
High inrush protection -
Maximum Continuous Load Current Rating Per Pole
0.5 amperes ac all locations -
Operating Voltage Type And Rating Per Pole In Volts
120.0 ac all locations -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
1500.0 ac all locations -
Circuit Protection Type
Overcurrent all locations -
Trip Release Method
Magnetic-hydraulic all locations -
Trip Release Characteristic
Time delay all locations -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
150.0 all locations -
Ultimate Trip Time Per Pole In Seconds
5.000 all locations and 60.000 all locations -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
2 toggle -
Actuator Function
Trip-reset -
Actuator Position Designation
At each pole -
External Actuator Linkage Arrangement
One and two linked -
Auxiliary Switch Function And Quantity
1 control -
Internal Trip Release Configuration
Series trip all locations -
Thread Size
3.0 millimeters -
Trip Release Duty Cycle
Continuous all locations -
Thread Pitch In Millimeters
0.50 -
Switch Location And Position Designation
Internal at pole one -
Trip Delay Time In Seconds Per Rated Continuous Current
5.000 at 150 pct all locations and 60.000 at 150 pct all locations -
Inclosure Protection Type For Which Designed
Dustproof -
Switch Terminal Type
Quick disconnect, male -
Switch Current Rating And Type In Amps
10.0 ac -
Switch Voltage Rating And Type In Volts
250.0 ac -
Frequency In Hertz
400.0 all locations -
Test Data Document
81541-2002 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Iso s -
Terminal Type And Quantity
4 threaded stud
More from these suppliers
- 5925-00-069-6535 MPN 503A402Circuit Breaker
- 5925-00-306-2824 MPN APL-111-1R0-62-102-MCircuit Breaker
- 5925-00-487-1498 MPN APL-1-1-51-153Circuit Breaker
- 5925-01-041-6342 MPN AP-MIL-1-1R-7-1-802Circuit Breaker
- 5925-01-043-2334 MPN AP-MIL-112-1-7-1-501Circuit Breaker
- 5925-01-112-4401 MPN 205-111-1REC3-42F4-101-M-OCircuit Breaker
- 5925-01-114-7018 MPN APG1-4-61-101-91Circuit Breaker
- 5925-01-220-5497 MPN APGN-666-1-41-403-00Circuit Breaker
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
![Mechanic Bill explains Overload Switch](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5925-01-175-5720 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
205-11-1REC2-42F-3-501A-M-O | Sensata Technologies Maryland, Inc |
Stock Check
![](/public/images/partscage_shelf3.png)