NSN 5975-01-088-5998
Electrical Conduit Elbow
1.218 inches single end inside diameter, 90.0 degrees deflection angle, any acceptable second end conduit type accommodated, end type: shouldered ferrule w/hexagon nut first end.
Manufacturer part number 10359757 for national stock number 5975010885998.
Datasheet
-
Product description
Electrical Conduit Elbow NSN 5975-01-088-5998.
-
MPN or Model
10359757
-
Schedule B
7307.92.9000 (Threaded elbows and bends of iron or steel (other than cast iron or stainless steel) for pipes and tubes) -
NMF (National Motor Freight)
062010 - Fittings Conduit NOI -
Unit Weight (Est.)
0.2 lb -
Inside Diameter
1.218 inches single end -
Deflection Angle
90.0 degrees -
Conduit Type Accommodated
Any acceptable second end -
End Type
Shouldered ferrule w/hexagon nut first end -
Leg End To Plane Of Bend Distance
1.562 inches single end -
Material
Iron -
Style Designator
Compression
More from these suppliers
- 4820-00-177-0015 MPN 10935636Safety Relief Valve
- 5975-00-280-3357 MPN 7765237Electrical Conduit Bushing
- 4820-00-423-2797 MPN 7410950Check Valve
- 4820-00-516-8438 MPN 8176638Hydraulic System Bleeder Valve
- 4820-00-741-1823 MPN 7411823Safety Relief Valve
- 5930-00-902-0193 MPN 7771274-3Thermostatic Switch
- 5930-00-905-5348 MPN 10946902Sensitive Switch
- 5935-01-112-8522 MPN 12276824Electrical Connector Bracket
An item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see entrance elbow, electrical. For items with one end having a male thread with a boss or shoulder, see box connector, electrical. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see entrance elbow, electrical. For items fabricated in the form of an elbow having both ends threaded male, see bend, electrical conduit.
Pricing and Availability
Get a quote for 5975-01-088-5998 electrical conduit elbowManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
10359757 | U S Army Tank Automotive Command |
10359757 | U S Army Tank Automotive Command |