NSN 5305-00-004-5149
High Torque Screw
Between 1.362 inches and 1.409 inches fastener length, flat countersunk head style, between 0.499 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 51B334-17 for national stock number 5305000045149.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-004-5149.
-
MPN or Model
51B334-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 1.362 inches and 1.409 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.499 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-151-8662 MPN AIC551C3-278Shoulder Screw
- 5305-00-440-9997 MPN AIC82-7-19Close Tolerance Screw
- 5305-00-487-5092 MPN AIC793-4-19Close Tolerance Screw
- 5305-00-510-5300 MPN LS15263V4-18Machine Screw
- 5305-01-055-3751 MPN NAS1101-4-7Machine Screw
- 5305-01-109-0603 MPN AIC985-10-40Close Tolerance Screw
- 5305-01-141-7905 MPN HT4020-6-20AXShoulder Screw
- 5305-01-158-5371 MPN 3M893-3-9Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-004-5149 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B334-17 | Northrop Grumman Technical Services, |
51B334-17 | Sps Technologies, Llc |
51B334-17 | Arconic Global Fasteners & Rings, |
51B334-17 | Huck International, Inc. |
51B334-17 | Hi-shear Corporation |
51B334-17 | Sps Technologies, Llc |
51B334-17 | Alcoa Global Fasteners, Inc. |
51B334-17 | Lisi Aerospace Canada Corp |
51B334-17 | Molex Incorporated |
51B334-17 | Northrop Grumman Systems Corporation |
51B334-17 | Molex Incorporated |
51B334-17 | Northrop Grumman Systems Corporation |
Stock Check
- NS: 552
- NE: 525