NSN 5305-00-018-0151
Tap Bolt
1.750 inches fastener length, hexagon head style, between 0.272 inches and 0.291 inches head height, width between flats: between 0.612 inches and 0.625 inches .
Manufacturer part number MS35297-90 for national stock number 5305000180151.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-018-0151.
-
MPN or Model
MS35297-90
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.125 inches -
Fastener Length
1.750 inches -
Head Style
Hexagon -
Head Height
Between 0.272 inches and 0.291 inches -
Width Between Flats
Between 0.612 inches and 0.625 inches -
Thread Diameter
0.438 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 30.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate or zinc and chromate -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
2 type and 10p style and 5 grade
More from these suppliers
- 5305-00-011-6549 MPN 116549Hexagon Head Cap Screw
- 5305-00-019-0575 MPN 170575Assembled Washer Screw
- 5305-00-057-1340 MPN 571340Setscrew
- 5320-00-050-1207 MPN 501207Tubular Rivet
- 5905-00-337-7094 MPN 8597263-120Film Fixed Resistor
- 4920-00-495-0580 MPN 7057Hydraulic System Components Test Stand
- 5935-00-647-2092 MPN 1916150Electrical Connector Backshell
- 5905-00-686-3068 MPN 8558317-002Inductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-018-0151 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35297-90 | Military Standards |
FFS85 | Federal Specifications |
106578 | Garwood/feller Inc |
180151 | General Motors Corp |
60X3286 | Napco International Llc |
180151 | Army Weapons Command |