NSN 5305-00-032-4376
High Torque Screw
Between 0.447 inches and 0.494 inches fastener length, flat countersunk head style, 0.303 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT202PB3-3 for national stock number 5305000324376.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-032-4376.
-
MPN or Model
HT202PB3-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.447 inches and 0.494 inches -
Head Style
Flat countersunk -
Head Diameter
0.303 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.187 inches and 0.197 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-369-1710 MPN 3M123-4-7Close Tolerance Screw
- 5305-00-462-5132 MPN NAS1134V8Close Tolerance Screw
- 5305-00-891-1725 MPN HT195-5-24Close Tolerance Screw
- 5305-01-015-3340 MPN NAS1191E08P18LSocket Head Cap Screw
- 5305-01-027-2005 MPN HT4020-3-7AClose Tolerance Screw
- 5305-01-042-4439 MPN HT193LB3-18Close Tolerance Screw
- 5305-01-055-3749 MPN NAS1101-06-13Machine Screw
- 5305-01-142-6286 MPN HT4020-4-17AXShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-032-4376 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT202PB3-3 | Hi-shear Corporation |
HT8207PB3-3 | Hi-shear Corporation |