NSN 5305-00-035-5381
High Torque Screw
Between 1.127 inches and 1.174 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number HS2623-3Z13 for national stock number 5305000355381.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-035-5381.
-
MPN or Model
HS2623-3Z13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.305 inches and 0.372 inches -
Fastener Length
Between 1.127 inches and 1.174 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3900 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mac p.S. 13145, fscm 76301 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-005-0648 MPN 51B222-10Close Tolerance Screw
- 5305-00-126-7646 MPN T150-08-13Machine Screw
- 5305-00-623-6356 MPN HT4036-4-7Close Tolerance Screw
- 5305-00-889-2912 MPN NAS1122-7HClose Tolerance Screw
- 5305-01-025-6961 MPN HT4049-4D14Close Tolerance Screw
- 5305-01-043-8057 MPN T151-3-9Close Tolerance Screw
- 5305-01-102-3613 MPN HT4072-3-3-5Close Tolerance Screw
- 5305-01-104-1468 MPN 3M925C3-5DClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-035-5381 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HS2623-3Z13 | Huck International, Inc. |
3M263-3-13 | Boeing Company, The |
HS2623-3Z13 | Huck Intl Inc |