NSN 5305-01-092-0088
High Torque Screw
Between 0.598 inches and 0.628 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AIC985-3-4 for national stock number 5305010920088.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-092-0088.
-
MPN or Model
AIC985-3-4
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 0.598 inches and 0.628 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-068-5402 MPN AIC811-00-3Socket Head Cap Screw
- 5305-00-186-9221 MPN AIC82-4-30Close Tolerance Screw
- 5305-00-310-5867 MPN AIC811-04-8Socket Head Cap Screw
- 5305-00-807-0389 MPN NAS1102-08-5Machine Screw
- 5305-00-823-5808 MPN NAS1102-06-12Machine Screw
- 5305-01-004-9496 MPN AIC812-08-7Machine Screw
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
- 5305-01-035-8062 MPN 51B334-15Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-092-0088 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC985-3-4 | Sps Technologies, Llc |
C7985-3-4 | Arconic Global Fasteners & Rings, |
C7985-3-4 | Devine Mfg Co |
C7985-3-4 | Sps Technologies, Llc |
C7985-3-4 | Sps Technologies, Llc |
C7985-3-4 | Sps Technologies, Llc |
C7985-3-4 | Alcoa Global Fasteners, Inc. |
AIC985-3-4P | Sps Technologies, Llc |
C7985-3-4 | Wesco Aircraft Hardware Corp. |